Payment & Shipping Terms:
|Material:||ASTM A36||Ladder:||Outer Ladder|
|Surface Treatment:||Hot Dip Galvanziation Or Painting||Galvanization Standards:||ASTM A123|
|Welding:||AWS D1.1||Strcuture:||4 -legged Steel Tubular Lattice|
mobile network tower,
mobile communication tower
4-legged Steel Tubular Communication Antenna Towers Mobile Communication tower
1. Production decription
LT steel are in the field of steel tubular communication antenna tower manufacturing since the year 2009.
The communication antenna tower consists of tower body ,Working platform,rest platform ,lighting rod ,ladder and antenna support.
This communication antenna towers main legs are made of steel tubular,and the other cross is used of angle steel .
Else ,it puts ladder outside .
|Mobile cell tower|
|1. Design Code||TIA/EIA-222-G/F|
|2. Grade||Mild Steel||High Tensile Steel|
|ASTM A36||ASTM A572 Gr50|
|EN10025: S235JR||EN10025: S355JR|
|3. Design Wind Speed||0-300KM/H|
|4. Allowable deflection||0.5 ~1.0 degree at operational speed|
|5. Tension strength (Mpa)||360~510||470~630|
|6. Yield strength (t≤16mm) (Mpa)||355||235|
|7. Elongation (%)||20||24|
|Bolts & Nuts|
|8. Grade||Grade 4.8, 6.8, 8.8|
|10. Standards for mechanical properties|
|10.1 Bolts||ISO 898-1|
|10.2 Nuts||ISO 898-2|
|10.3 Washers||ISO 6507-1|
|11. Method||CO2 Shielded Arc Welding & Submerged Arc Welding(SAW)|
|12. Standard||AWS D1.1|
|13. Method||Hydraulic Press Stamping|
|14. Galvanization standard of steel sections||ISO 1461 or ASTM A123|
|15. Galvanization standard of bolts and nuts||ISO 1461 or ASTM A153|
Terms and condition:
Price Term: EXW, FOB, CFR or CIF, FCA and so on
Shipping port: Qingdao port
Payment Term: Usually 30% by T/T as deposit balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
Delivery Time: Usually 30 days after PO/drawing/prepayment confirmed.
Package: Normally we use steel wire to make the angle into bundle ,then use special material to protect the zinc, or according to client’s requirement.
Please provide drawings if you have so that we can calculate the accurate price for you.
We also provide design according to your requests, if you don't have drawings.
2. Production capacity
|production capacity per month||3000 tons|
3. Technical support
|Service you can get from our engineer||tower design,tower lofting ,tower weight calculation and loading plans|
|Software they used||TTA,STWXP,TMA,LMA,Daoheng|
4. Quality Control
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
Catalogue of certificatge as followings :
We usually has two ways of trial assembly: trial assembly before galvanzation and after galvanization
6. Hot dip galvanization and painting
7. Package and delivery
8. Company introduction
Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2005,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.
The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.
• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007
We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.
Welcome to contact us ,we make sure your every question will be answered in time .
9. Product catalogue:
Contact Person: aggie