|
Product Details:
Payment & Shipping Terms:
|
| Type: | Suspension Tower /tension Tower/terminal Tower /transposition Tower | Usage: | Electric Power Transmission |
|---|---|---|---|
| Material: | ASTM A572 Grade 50/A36 | Surface Treatment: | Hot Dip Galvanization /cold Zinc /painting |
| Voltage: | 10-1000KV | Conduct Circuit: | Double Or Single |
| High Light: | power distribution tower,transmission line steel towers |
||
110KV Power Transmission Steel Tower Transmission Line Tower for Power Distribution
We are professional manufacturer of transmission steel towers used in high voltage AC and DC systems .
Heigth from 9m to 100m
Transmission steel towers Voltage from 10-1000KV
The transmission steel towers meet ASTM Standards,GB/T standards and related standards .
If the thickness of the material not less than 5mm,The min average thickness of the galvanization of transmission
steel tower is more than 86um.
Type test and preshipment test is accepted .
If needed ,we even can supply an engineer for help installing the transmissions steel towers .
Catalogue of the transmission line towers as followings :
Test report of transmission steel towers.
2. Product capacity
We have 5 production line for manufacturing transmission steel towers ,We can supply 2000 tons steel towers
per month .And we have enough room to place more transmisson steel towers production line if needed .
| Numbers of angle production line | 5 |
| Production capacity per month | 2000 tons |
3. Technical support
Our engineer and drawer has lots of designing ,lofting experience of transmission steel towers .
Which we can supply a overall solution of all the towers .
| Service you can get from our engineer | tower design,tower lofting ,tower weight calculation and loading plans |
| Software they used | TTA,STWXP,TMA,LMA,Daoheng |
4. Quality control
We have very strict quality control in every tranmsission steel towers .
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
We usually has two ways of trial assembly for tranmsmission steel towers : trial assembly before galvanzation
and after galvanization
6. Hot dip galvanization and painting
7. Package and delivery
Package we usually do as our clients requirment .Usually for transmission steel towers,we fixed angle steel by
steel wire to bundles and use special material to protect zinc .
For fasteners ,we use bucket ,bag or box.
8.Company introduction
Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission steel towers (the voltage up to 1000kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.
The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 40,000 tons.
Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.
• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007
We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.
Welcome to contact us ,we make sure your every question will be answered in time .
9.Product catalogue:
Contact Person: aggie
Tel: +8613563693390
| Factory Address:The west of Dahoutun Village,Jiaolai town,Jiaozhou ,Qingdao | |
| Sales office:The west of Dahoutun Village,Jiaolai town,Jiaozhou ,Qingdao | |
| +86--18563978182 | |
| aggie@liangtasteel.com | |
